How to set or remove minimum height Series 2 Pro desk

Setting the minimum height of the desk:

1. Use the “Up” and “Down” buttons to move the desk-top height to the desired height you wish to set as the minimum.
2. Press “Up” and “Down” at the same time for only one second (no longer or desk may go into reset mode). Release the “Up” button but continue to hold the “Down” button and simultaneously press the “Up” button three times after which you should hear a single ‘beep’.
3. After completing step 2 the minimum height will have been set on the desk system. The desk will now be unable to be moved lower than this height.

Unsetting (removing) minimum height of the desk:

1. Use the “Down” button to move the desk-top height to the height previously set as minimum (If you are unsure what the minimum height is, move the desk-top to the lowest height it will go).
2. Press “Up” and “Down” at the same time for only one second (no longer or desk may go into reset mode). Release the “Up” button but continue to hold the “Down” button and simultaneously press the “Up” button three time after which you should hear a single ‘beep’.
3. After completing step 2 the minimum height will have been removed on the desk system. The desk will now be able to move lower than this height. You will know this setting is removed if the desk moves past the minimum to the lowest possible height.

See the full instructions here

Or watch the video: